Where is the suspension module located on a 2000 expedition?

April 28, 2009 | Maintenance & Repairs  

Was told by ford that the wiring plug going into the module was corroded and needed replaced. The underlying problem is my rear suspension is sitting on the axle. Ford said they cant hook their machines to it until module problem is fixed. Is this something... Read More

I have a problem with the rear suspension on my 2002 ford eddie bauer expedition. ?

April 23, 2009 | Maintenance & Repairs  

I have a 2002 ford eddie bauer expedition. I have changed the sensors and the pump for the levelling suspension, however the truck continues to be jacked up to the max (notdown!) No service provider see,s to be able to offer any advice including my local... Read More

Why do staggered rear shocks improve the rear suspension?

April 22, 2009 | Maintenance & Repairs  

Obviously this is only done on live axles I’ve heard that manufacturers have improved rear suspension by staggering shocks, i.e. one on front, one behind the axle. Does it keep the axle better located? Posted by bettysdad  Read More Ø

What is a rear suspension automatic load leveling sensor on a crown Victoria used for and what kind of changes

April 19, 2009 | Maintenance & Repairs  

I need to know how this works and if they have made any changes on it . I also would like to know if there is somewhere I could get more info from Posted by david n  Read More Ø

Any cheap and easy way to firm up my van’s rear suspension?

April 18, 2009 | Maintenance & Repairs  

Any cheap and easy way to firm up my van’s rear suspension so that it doesn’t bottom out during a few ski trip per year loaded with people and gears? Something like squeezing couple tennis balls in the coil springs? Posted by Derek C  Read More Ø

what type of suspension setup for drifting is used?

April 18, 2009 | Maintenance & Repairs  

is the front and rear suspension loose or tight? are the tires high pressure? are the sway bars tight or loose? Posted by tweedldee humpledee  Read More Ø

Is is possible to transfer parts from my hardtail to a full suspension frame?

April 15, 2009 | Maintenance & Repairs  

I have a Raleigh Mojave 8.0. Can I buy a frame with the rear suspension and just transfer all the parts from my hardtail? My reason for doing this would be to cut down on the cost of buying a complete bike. Posted by irish  Read More Ø

How do I know my rear suspension needs replacing?

April 15, 2009 | Maintenance & Repairs  

Recently, a passenger in the back of my car told me I needed new suspension. How can I tell for sure? I’ve been paranoid that the car is bouncing more than it did, but I have no idea if that is even a tell-tale sign. Posted by Tony The Pony  Read More Ø

Does the Diamondback Knuckle Box Rear Suspension hit your calf while pedaling?

April 15, 2009 | Maintenance & Repairs  

I rode a Diamondback with the Knuckle Box rear suspension and after a moderate ride was left with bruising on both calves. Is this common or am I a genetic freak with giant calves? Posted by Antwan  Read More Ø

How does rear suspension effect performing wheel stands on a mountain bike?

April 15, 2009 | Maintenance & Repairs  

Please indicate the type of rear suspension or the bike that your comments apply to. Also what are the best types of mtb’s for wheel stands in general? Posted by sscomp2004  Read More Ø

 Page 1 of 4  1  2  3  4 »