How do I remove the door panels on a 1999 Mitsubishi Eclipse to install speakers?
March 30, 2009 | Car
Reply
Re: “How do I remove the door panels on a 1999 Mitsubishi Eclipse to install speakers?”
You must be logged in to post a reply.
if you dont have power windows unscrew door handle and window shank thing, and then door panel thing you grab to close the door and unscrew whatever else there is on your door panel, the get a big flathead screw driver and pop off door panel. you wont break it , they are just clip on things that are holding it together,
hope this helps
You will need a phillips head screw driver and a clip tool . remove all the screws then place the clip tool between the panel and the door and apply pressure until each clip pulls away from its hole . Its very simple and shouldn’t take but minutes to do. Clip tools can be purchased at your Local Parts store.
there is a screw in the door handle, down in the spot you hold on to when you close the door, 2 screws on the right side/end closest to the engine, and 2 screws on the left side/closer to rear of car, with those removed all you have to do is carefully pull around the edges to pull the panel loose, and CAREFULLY unhook the connector from the power window switch. with that out of the way you will see where the speaker sits, 4 more screws to pull it out and unhook the wiring. i believe all the screws are phillips head, coincidentally i have to go pull that panel off to adjust the window tomorrow. lol good luck.